AOpen MP65-D Instrukcja Użytkownika Pobierz pdf (Strona 22)

To merge a mixed system to the i-Vu Plus v6.0 application

3 Click

when you see the message

The system will be stopped and restarted. Do you wish to proceed?

The

Operation Status

message updates as the i-Vu application prepares and creates the backup. Wait for

Operation Status

to state

No Background Operations Currently Active

4 Remove USB drive from the web server.

NOTES

○ A check of the USB drive will show a backup file named

system.backup

○ An error may be displayed under the

Management Tool

title stating

The USB device failed to mount and

initialize. Connect the USB drive to the first USB port

. In this case, try a different USB drive or try

rebooting the i-Vu web server, as there was an issue accessing the USB drive.

5 Exit from

Management Tool

6 You must reboot the web server before proceeding.

Install i-Vu® v6.0 software

Use the following steps to install the i-Vu® v6.0 application on

both

of your web servers, even the one you will no

longer use.

1 Remove the i-Vu® web server from the network by disconnecting the LAN cable.

2 Insert the i-Vu® v6.0 Installation DVD into the i-Vu® web server DVD drive or USB Installation drive into the

USB port on the front of the web server.

3 Shut down the i-Vu® web server by pushing the On/Off button

once

. Wait for the blue light to turn off (could

take as long as 2 minutes).

4 Press the On/Off button again to restart the web server. The installation begins automatically.

5 The Installation DVD ejects or the USB drive's light goes off when the installation is complete. This process

takes several minutes.

NOTE

Do not power off during the installation.

Connect and power up target i-Vu® web server

If you are currently using both a USB CCN and an Open Adapter, you must replace one of them with an external

router. i-Vu v6.0 application does not support 2 USB cables on the single web server.

1 If necessary, re-locate the i-Vu web server that you have chosen as the web server for i-Vu v6.0. For instance,

if you are using a USB Adapter cable, you most likely need to move the target web server with the largest

memory to the physical location of the cable.

2 Plug the power cable into the back of the i-Vu® web server and into an electrical outlet.

NOTE

We highly recommended using a UL Certified power surge/RFI suppression device.

3 Connect an Ethernet cable from the laptop computer’s network port, or the customer's LAN, to the Ethernet

jack on the back of the i-Vu® web server.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

Komentarze do niniejszej Instrukcji

Brak uwag

AOpen MP65-D Instrukcja Użytkownika Strona 22

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Części komputerowe AOpen MP65-D