AOpen MP65-D Instrukcja Użytkownika Strona 11

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 46
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 10
To upgrade a single system to the i-Vu Standard/Plus v6.0 application
On the Startup page:
1 You must carefully select the
USB Network Type.
If you change from using a router to a cable at a later time,
you will lose all your settings and have to restore to factory defaults.
NOTE
Do
not
fill in any other blank fields on the Startup page. Restoring your system in Step 2 will
automatically fill in the other information.
2 Click
Link to Management Tool
at the bottom of the screen.
Restore data from backup
1 Click
PC Restore
or
USB Restore
under
Manage Server Data
in the
Management Tool
.
PC Restore
- Browse to your backup file and click
Upload File
, then click
Perform Restore
.
USB Restore
- Place your backup USB drive in any port on the i-Vu web server. Select the backup file and
click
Perform Restore
.
2 Restore is complete when
Operation Status
displays
No Background Operations Currently Active
.
Restore Addressing and set NTP (Network Time Protocol)
1 Refer to the data recorded from your original i-Vu web server. See Capture current i-Vu® web server settings.
(page 5)
2 Enter your previous
Name
.
3 If your original setup did not have
Obtain an IP address automatically
checked, then enter
ALL
of the IP
address information from the original configuration.
4 Enter your original settings in
i-Vu Port Configuraton
.
i-Vu® Application Carrier Proprietary and Confidential CARRIER CORPORATION ©2014
Rev. 3/21/2014 All rights reserved
7
Przeglądanie stron 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Komentarze do niniejszej Instrukcji

Brak uwag